{"title":"Heavy Hitter","description":"\u003cp\u003eRugged, high-performance parts for Surron, Talaria \u0026amp; electric dirt bikes. Reinforced drivetrain upgrades built to handle serious power and abuse.\u003c\/p\u003e","products":[{"product_id":"gritshift-heavy-hitter-skid-plate-talaria-sting-mx3-mx4-mx5-7075-t6-aluminum","title":"GritShift Heavy Hitter Skid Plate – Talaria Sting MX3\/MX4\/MX5 | 7075 T6 Aluminum","description":"\u003cp\u003e\u003cstrong\u003eIMPORTANT NOTICE:\u003c\/strong\u003e V2 is now available for Pre-Order as of 12\/1\/2025. The V2 can be seen \u003ca href=\"https:\/\/gritshift.com\/products\/heavy-hitter-v2-talaria-skid-plate\" title=\"Heavy Hitter V2 Talaria Sting Skid Plate\"\u003eHERE\u003c\/a\u003e. This V1 will be discontinued as it is not compatible with all new aftermarket motors — see fitment notes below.\u003c\/p\u003e\n\n\u003ch2\u003eThe Last Skid Plate Your Talaria Will Ever Need\u003c\/h2\u003e\n\u003cp\u003eBuilt from 7075 T6 billet aluminum with a 10mm bash plate rated to withstand over 6,000 lbs of force, the GritShift Heavy Hitter Skid Plate is the most over-engineered motor protection solution available for the Talaria Sting E-Moto. Whether you're shredding trails or dragging through logs, this skid plate is built to keep you moving.\u003c\/p\u003e\n\n\u003cp\u003eThe motor is the most vulnerable component on your e-bike — sitting at the very bottom of the frame, exposed to rocks, roots, and hard impacts. The Heavy Hitter's precision strike angles, extended tail section, and strategic ventilation slats deliver unmatched protection on and off road.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e7075 T6 billet aluminum side supports — the strongest alloy available\u003c\/li\u003e\n\u003cli\u003e10mm aluminum bash plate tested to 6,000+ lbs of force\u003c\/li\u003e\n\u003cli\u003eStrategic ventilation slats for active motor cooling under load\u003c\/li\u003e\n\u003cli\u003eExtended tail section protects against perpendicular strikes\u003c\/li\u003e\n\u003cli\u003eEach section is independently removable for easy maintenance access\u003c\/li\u003e\n\u003cli\u003eReplaceable bash plate — swap it out in minutes if damaged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Warranty on Side Rails:\u003c\/strong\u003e If they ever bend, we replace them FREE\u003cbr\u003e\u003cem\u003e(Bash plates not included; replacements available upon request)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 7075 T6 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eBash Plate Thickness: 10mm\u003c\/li\u003e\n\u003cli\u003eWeight: ~3.1 lbs\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: USA\u003c\/li\u003e\n\u003cli\u003eAvailable Colors: Silver, Black, Purple, Gold, Red, Blue\u003c\/li\u003e\n\u003cli\u003eHS Code: 871410\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTalaria Sting MX3 \/ MX4 \/ MX5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e Will not fit EBMX XTA Core Motor. Torp Controller covers require slight modification to fit.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eWe recommend using \u003cstrong\u003eblue medium threadlocker\u003c\/strong\u003e on all hardware during installation. Mounting bolts are T20 Torx bolts. Recommended torque value: \u003cstrong\u003e2.6 Nm \/ 1.92 ft-lb \/ 23 in-lb\u003c\/strong\u003e. This is barely hand-tight — with threadlocker correctly applied, it will hold securely and remain removable.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Guide\u003c\/h2\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AfmkkwFp4Vs\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Blue","offer_id":45932253970673,"sku":"SQ4328514BL","price":189.99,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":43949149192433,"sku":"SQ4328513","price":189.99,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":45932251185393,"sku":"SQ4328514GL","price":189.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":43949149257969,"sku":"SQ4328514","price":189.99,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":45932250202353,"sku":"SQ4328514PU","price":189.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":45932251939057,"sku":"SQ4328514RE","price":189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-frame-swingarm-silver-gritshift-heavy-hitter-skid-plate-sq4328513-49192433-38341813436657.jpg?v=1773629653"},{"product_id":"heavy-hitter-big-sender-85-mx-fork-conversion-kit-1","title":"Heavy Hitter Big Sender 85 MX Fork Conversion Kit","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis Fork Conversion cup kit allows a plug n play install of a KTM 85 complete front end with the proper triple clamp spacing and bearing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you're one of the few riders who wants to push your Sur Ron or Talaria to the absolute limit – far beyond what the stock mountain bike-derived front end can handle – those mountain bike suspension options just aren’t going to cut it.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWith robust CNC-machined parts delivering optimized geometry, you can now transform your Sur Ron or Talaria with the addition of tried and true KTM capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eTake your e-bike into another level of capability with the Heavy Hitter Big Sender kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eConvert your e-bike to run real MX forks from a KTM 85\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eEliminate weak failure points and short service intervals of OEM front end\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eGain the ability to dial in settings for your weight and riding style\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePre-pressed bearing races for simple install\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Aia4NZvQvzY?si=JWL1-7tUZnK32dd0\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTechnical Notes\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eA complete KTM 85 MX front end is required.\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e This usually ranges from $799 to $2,599. A complete front end consists of fork tubes, triple clamps, front braking system, front wheel (19\" recommended), front axle, and MX-style handlebars. Price is largely dependent on which fork style you choose: Dual-cartridge spring forks are heavier but cheaper, whereas air forks found on 2018+ models are lighter but more expensive. From our experience, we would choose air forks every time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNote for KTM air forks.\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e Please check clearances on the bottom for the 2 posts on the triple clamp where the fender bolts in. This may need to be slightly shaved for adequate clearance and is only an issue with some years and brands of triple clamps. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSur Ron LBX \/ LBS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSegway X160 \/ X260\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eTalaria Sting MX3 \/ MX4 \/ MX5\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cstrong\u003eNotes: Requires KTM front end.\u003c\/strong\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Sur Ron","offer_id":43949149520113,"sku":"SQ221485","price":49.99,"currency_code":"USD","in_stock":false},{"title":"Talaria","offer_id":43949149585649,"sku":"SQ2241252","price":44.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-suspension-talaria-heavy-hitter-big-sender-85-mx-fork-conversion-kit-sq2241252-49585649-38341812650225.jpg?v=1773629676"},{"product_id":"heavy-hitter-billet-footpeg-support-brace-with-o-rings-1","title":"Heavy Hitter Billet Footpeg Support Brace With O-Rings","description":"\u003cp\u003eDon't let your footpeg bracket break! Redesigned for an improved sleek look and added strength.\u003c\/p\u003e\n\u003cp\u003eSupport it with a GritShift aluminum footpeg support brace. Riding while standing on the Sur-Ron or Segway footpegs can bend the brackets and eventually lead to bracket failure.\u003c\/p\u003e\n\u003cp\u003eThe footpeg support brace helps you avoid a dangerous break and potentially serious injury when you're pushing your e-bike on the trails, tracks, or streets. Extensive testing has been done on these braces to ensure that, whether your bike is brand new or you've been riding it for years and already started to bend your stock bracket, this new one will fit!\u003c\/p\u003e\n\u003cp\u003eFits perfectly to your bike with the included O-Rings \u0026amp; to prevent any unwanted rattling. You can have this footpeg bracket bolted onto your Sur Ron E-Bike, or X260 within 10-15 minutes. Simply remove the 2 bolts holding on one of your footpeg brackets, slide the brace in the slot, and reinstall the 2 bolts!\u003c\/p\u003e\n\u003cp\u003eThat's it!\u003c\/p\u003e\n\u003cp\u003eYou are back to riding with added protection and safety installed on your Sur Ron or Segway e-bike in less time than it takes to wash your bike.\u003c\/p\u003e\n\u003cb\u003eFeatures\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eQuick Install - Takes 15 Minutes Or Less\u003c\/li\u003e\n\u003cli\u003eLightweight 7075 Aluminum Construction\u003c\/li\u003e\n\u003cli\u003ePrevents Injuries Sustained From Broken Foot Peg Brackets\u003c\/li\u003e\n\u003cli\u003eDirect Fit For Sur Ron and Segway X260\u003c\/li\u003e\n\u003cli\u003eNon Rattle Design with 2 rubber grommets included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eSur Ron LBX\u003c\/p\u003e\n\u003cp\u003eSegway X260\u003c\/p\u003e\n\u003cp\u003eSegway X160\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Silver","offer_id":43949149552881,"sku":"SQ1088298","price":16.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":43949149651185,"sku":"SQ1074265","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-foot-hand-controls-black-heavy-hitter-billet-footpeg-support-brace-with-o-rings-sq1074265-49651185-38341812584689.jpg?v=1773629680"},{"product_id":"heavy-hitter-t-shirt-black","title":"Heavy Hitter T-Shirt Black","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eAlongside the launch of our new Heavy Hitter product line, we’ve created a shirt with the ultimate blend of comfort and toughness for riders who aren't afraid to push their limits. We're talking about a shirt that's so badass it'll have other riders green with envy.\u003c\/p\u003e\n\u003cp\u003eLike anything (or anyone) rocking the Heavy Hitter logo, these shirts are built to last. With reinforced stitching and moisture-wicking technology [edit this for whatever it has] that keeps you dry even when you're pushing the limits of what’s physically possible, this shirt might as well just say, \"I send it hard,\" but we wanted you to be able to wear it in mixed company, like at church or your sister’s bar mitzvah.\u003c\/p\u003e\n\u003cp\u003eBut here's the thing – we didn't sacrifice comfort for toughness. The Heavy Hitter Tee is so damn comfy, you won't want to take it off. Soft, breathable fabrics and a relaxed fit mean you'll be able to ride all day long without feeling like you're wearing a straight jacket.\u003c\/p\u003e\n\u003cp\u003eSo if you're ready to add an instant 50 horsepower to your e-bike and show the world what you're really made of, wear a shirt that says all of that right on the front.\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Small","offer_id":43974815449329,"sku":"sku-44053942894821","price":24.89,"currency_code":"USD","in_stock":false},{"title":"XL","offer_id":43974815285489,"sku":"sku-44053942993125","price":24.89,"currency_code":"USD","in_stock":false},{"title":"XXL","offer_id":43974815318257,"sku":"sku-44053943025893","price":24.89,"currency_code":"USD","in_stock":false},{"title":"Medium","offer_id":43974815482097,"sku":"sku-44053942927589","price":24.89,"currency_code":"USD","in_stock":false},{"title":"Large","offer_id":43974815351025,"sku":"sku-44053942960357","price":24.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-shirt-small-heavy-hitter-t-shirt-black-sku-44053942894821-15449329-32200073347313.jpg?v=1773629709"},{"product_id":"heavy-hitter-titanium-1-5-linkage-upgrade","title":"Heavy Hitter Titanium 1.5\" Linkage Upgrade","description":"\u003cp\u003eHeavy Hitter proudly presents the most robust and lightweight linkages on the market. \u003cstrong\u003eWHY? \u003c\/strong\u003eyou might ask. Well that's because we at GritShift have broken just about every linkage on the market. Usually from big jumps and hard landings, but we have also seen premature failure from just woods riding. And that's when Heavy Hitter decided to design the TI Linkage that can withstand the abuse we give our bikes. \u003cbr\u003e\u003cbr\u003eNot only could a broken linkage ruin your weekend riding trip, but it could also destroy your rear shock. Usually, if a linkage breaks it will bend the output shaft of your shock. And if you have an OEM shock, you probably should have upgraded that regardless, but if you have an already upgraded shock, well... You will likely have to buy another one.\u003c\/p\u003e\n\u003cp\u003eThe Heavy Hitter Linkage is crafted from solid Titanium Ti-6Al-4V, these linkages offer unparalleled durability and performance. Designed with precision, these linkages perfectly align with a 1.5-inch lift, striking the ideal balance between front grip, and rake angle, with rear grip. \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1.5 Inch lift\u003c\/li\u003e\n\u003cli\u003eJet wash finish \u003cspan data-mce-fragment=\"1\"\u003eTitanium Ti-6Al-4V\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eExtremely strong and lighter than other aftermarket options\u003c\/li\u003e\n\u003cli\u003eSimple install in less than 20 minutes\u003c\/li\u003e\n\u003cli\u003eOur strongest, lightest, cleanest, highest quality Parts for your E-bike\u003c\/li\u003e\n\u003cli\u003eThe total weight of the linkage, bearings, and sleeves is 7 ounces. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSur Ron LBX\u003c\/li\u003e\n\u003cli\u003eSegway X160 \/ X260\u003c\/li\u003e\n\u003cli\u003eVentus ONE+\u003c\/li\u003e\n\u003cli\u003e79Bike Falcon Pro \/ GT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":43974815383793,"sku":"SQ8923456","price":309.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-suspension-default-title-heavy-hitter-titanium-1-5-linkage-upgrade-sq8923456-15383793-32200073445617.jpg?v=1773629712"},{"product_id":"heavy-hitter-titanium-triangle-upgrade-1","title":"Heavy Hitter Titanium Triangle  Upgrade","description":"\u003cp\u003eWhen it comes to enduring the immense pressure of jumps and off-road adventures, suspension triangles play a pivotal role. Unfortunately, the factory triangles, composed of relatively inexpensive aluminum material, are susceptible to fracturing into separate pieces under excessive loads or upon landing.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eBut fear not! Heavy Hitter brings you the epitome of strength and lightweight design with our exceptional triangles. Crafted from solid Titanium Ti-6Al-4V, these triangles are the epitome of resilience and durability.\u003c\/p\u003e\n\u003cp\u003eRest assured, this remarkable product impeccably preserves the OEM suspension geometry while ensuring a flawless fitment with all available linkage options. Upgrade your gear today with Heavy Hitter Titanium Parts and unlock unparalleled performance!\u003c\/p\u003e\n\u003cb\u003eFeatures\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eJet wash  finish \u003cspan data-mce-fragment=\"1\"\u003eTitanium Ti-6Al-4V\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eExtremely strong and lighter then other aftermarket options\u003c\/li\u003e\n\u003cli\u003eSimple install in less than 20 minutes\u003c\/li\u003e\n\u003cli\u003eOur strongest, lightest, cleanest, highest quality triangle for your E-bike\u003c\/li\u003e\n\u003cli\u003eTotal Weight of the triangle is 6 ounces. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eSur Ron LBX\u003c\/p\u003e\n\u003cp\u003eSegway X260\u003c\/p\u003e\n\u003cp\u003eSegway X160\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":43974815613169,"sku":"SQ2935842","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-suspension-default-title-heavy-hitter-titanium-triangle-upgrade-sq2935842-15613169-32200073969905.jpg?v=1773629714"},{"product_id":"heavy-hitter-titanium-suspension-hardware-1","title":"Heavy Hitter Titanium Suspension Hardware","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eOur bolt kit works with Prickly Linkage\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003eIntroducing the Heavy Hitter Titanium Suspension Hardware, the ultimate solution for upgrading from those frustrating low-quality stock bolts that bend or strip upon removal. This permanent replacement is a game-changer.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe OEM and even some upgraded rear suspension hardware kits lack one very important thing that we made sure to do the correct way. Which is providing the proper shoulder length for each bolt. All of your OEM hardware has improper spec shoulder length which causes the bolt to bend\/break on the threaded area. The worst is most upgraded hardware is just replicating the OEM hardware and using different materials.\u003cbr\u003e\u003cbr\u003eWe made sure to do this 100% these bolts have been CAD designed ourselves to the specs they should have been in the first place.\u003c\/p\u003e\n\u003cp\u003eUpgrade your E-bike's suspension hardware with the Heavy Hitter Titanium Suspension Hardware and experience the pinnacle of quality and performance.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFully shanked bolts eliminate the risk of threaded sections damaging your frame or swingarm.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe one-piece Triangle Pivot bolt features a large flanged face that acts as a protective shield.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBid farewell to the OEM's mix of loose bushings, and undersized bolts with the new one-piece pivot bolt.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFour nylon washers are included to safeguard the needle cage bearing from dirt and water, placed between the pivot bolt flange and triangle to frame.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFitment:\u003c\/h3\u003e\n\u003cp\u003eSur Ron LBX\u003c\/p\u003e\n\u003cp\u003eSegway X260\u003c\/p\u003e\n\u003cp\u003eSegway X160\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":43974815777009,"sku":"sku-44100651909349","price":129.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-default-title-heavy-hitter-titanium-suspension-hardware-sku-44100651909349-15777009-32200074100977.jpg?v=1773629716"},{"product_id":"heavy-hitter-direct-mount-stem-riser-for-e-bikes-2-rise-for-31-8mm-bars","title":"Heavy Hitter Direct Mount Stem Riser for E-Bikes, 2\" Rise, for 31.8mm Bars","description":"\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cstrong\u003eImportant Notice:\u003c\/strong\u003e Our next production run will feature a new logo and brand name, \"Heavy Hitter,\" on select products only. This change will not affect the quality or performance of our products. Please note that while some products will feature the new logo, others will continue to feature the \"GritShift\" logo for the time being. Thank you for your support and loyalty to our brand.\u003c\/p\u003e\n\u003cp\u003eOur first experiences with Sur Ron, Segway, and Talaria left us wanting better ergonomics. To solve that problem we created our own direct-mount stem with a 2” rise and a one-piece handlebar clamp to make installation a breeze. This stem riser is a direct fit for Sur Ron, Segway, and Talaria e-bikes.\u003c\/p\u003e\n\u003cp\u003eFunctional and attractive, the GritShift Direct Mount Stem Riser not only puts your body in a more comfortable position but also gives you better leverage over the front end making the bike more flickable; especially in low-speed situations.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e If you do not plan on cutting your steering tube stem, you will need to purchase a stem spacer kit. Once you remove your OEM post mount stem it is recommended to cut the stem down and use the OEM stem spacer to set headset preload.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMake your e-bike feel more comfortable and precise with this stem riser\u003c\/li\u003e\n\u003cli\u003eDirect mount stem adds 2” of rise to your handlebars\u003c\/li\u003e\n\u003cli\u003eWide clamping area for increased bar stiffness\u003c\/li\u003e\n\u003cli\u003eBuilt strong to withstand abuse and light enough for racing\u003c\/li\u003e\n\u003cli\u003eMade from 7075-T6 Aerospace-grade aluminum with an anodized finish\u003c\/li\u003e\n\u003cli\u003eBolts directly to stock and most aftermarket forks\u003c\/li\u003e\n\u003cli\u003eFits 31.8mm handlebars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"color: #ff632c;\"\u003e\u003cstrong\u003eGritShift exclusive!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll GritShift parts are engineered to be tough enough to withstand extreme conditions while remaining light enough for racing applications. Every product that carries our name is tested to destruction in our shop and on the trails by our team of experienced riders - all so you can buy with confidence.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eWe are open to producing additional colors if you want them! Please \u003ca href=\"https:\/\/gritshift.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e to suggest a new color for this part.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/LTl0ZCIOpsk\" height=\"315\" width=\"560\" data-dashlane-frameid=\"5809\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSur Ron LBX\u003c\/li\u003e\n\u003cli\u003eSegway X260\u003c\/li\u003e\n\u003cli\u003eTalaria Sting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Part Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFOX 40:\u003c\/strong\u003e 2009+ models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarzocchi:\u003c\/strong\u003e 2013+ 888 and 380 models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRockShox BoXXer:\u003c\/strong\u003e All models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManitou Dorado:\u003c\/strong\u003e All models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther:\u003c\/strong\u003e Most dual crown downhill\/MTB forks (RST Killah, DNM, Fast Ace, etc.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the known and tested compatibility for this product. Factory variations, dealer options, and aftermarket modifications could affect compatibility in your specific case. Please verify compatibility to the best of your ability before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eIf you have successfully installed this part on a setup not listed here, please \u003ca href=\"https:\/\/gritshift.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e so we can help others by updating this list.\u003c\/em\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Black","offer_id":44116718944497,"sku":"SQ0278922","price":79.89,"currency_code":"USD","in_stock":true},{"title":"Bare Aluminum","offer_id":44116718977265,"sku":"SQ0278923","price":79.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-foot-hand-controls-black-heavy-hitter-direct-mount-stem-riser-for-e-bikes-2-rise-for-31-8mm-bars-sq0278922-18944497-32615274447089.webp?v=1773630004"},{"product_id":"heavy-hitter-billet-reinforced-suspension-linkage","title":"Heavy Hitter Billet Reinforced Suspension Linkage","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eHeavy Hitter has produced an amazing upgrade for your favorite e-bike. The rear suspension linkage is a known weak point in the stock suspension setup. Many riders have complained about suspension noise and play since the bike was released.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThat play means it's only a matter of time until bearing and linkage failure comes.\u003c\/p\u003e\n\u003cp\u003eOur linkage is designed with 4mm of shock preload. Your linkage will lightly rest on the swingarm at full droop with the rear wheel off the ground. This is a huge advantage for all bikes! Most Mountain bike suspension does not include a top out control on the shock. Unfortunately, this leads to the shock shaft and seals slamming into the shock body at full droop. If this happens continuously, it will prematurely blow out your suspension seals and rebound control.\u003c\/p\u003e\n\u003cp\u003eTo prevent premature shock wear, we have designed the linkage to have 4mm of top out stop, similar to limiting straps found on Trophy trucks and side by sides. This will greatly increase the life of your shock and components - especially for heavier riders needing 550-650 lb. springs, and guys that love sending big jumps. \u003c\/p\u003e\n\u003cp\u003eThis will only fit the correct 10.5 x 3.5 inch, and smaller shocks! Longer shocks are not advised. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Always grease bearings before riding!\u003c\/p\u003e\n\u003cb\u003eFeatures\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eMade from 7075 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eSteel bushings for a precision no slop fit\u003c\/li\u003e\n\u003cli\u003ePre-Assembled with new bearings, bushings, and seals\u003c\/li\u003e\n\u003cli\u003eImproved quality and strength!\u003c\/li\u003e\n\u003cli\u003eSimple installation takes 20 minutes or less\u003c\/li\u003e\n\u003cli\u003eType 2 black anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eTalaria Sting\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":44116726776049,"sku":"SQ9832654","price":99.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-suspension-default-title-heavy-hitter-billet-reinforced-suspension-linkage-sq9832654-26776049-32615300268273.jpg?v=1773630009"},{"product_id":"heavy-hitter-reinforced-suspension-triangle-for-talaria-sting","title":"Heavy Hitter Reinforced Suspension Triangle for Talaria Sting","description":"\u003cp\u003eEver feel like your Sting’s rear suspension just isn’t up to the task? Get ahead of potential failure by upgrading your Sting’s suspension triangle to this robust unit from Heavy Hitter.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ePushing a stock Talaria Sting through challenging terrain like big jumps and rough rocks can break the stock triangle surprisingly easily. That weak cast aluminum piece just can’t take the heavy load from hard landings over time or the constant barrage of impacts on a hard enduro course. People have even caused damage from just hopping curbs and living the stunt life, and if your suspension triangle breaks, you’re walking home.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eTested by both stunters and hard enduro riders, the Heavy Hitter suspension triangle has a reinforced billet aluminum construction that can handle the gnarliest conditions. To really beef up your Sting’s rear suspension, \u003ca href=\"https:\/\/gritshift.com\/products\/gritshift-billet-reinforced-suspension-linkage\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/gritshift.com\/products\/gritshift-billet-reinforced-suspension-linkage\"\u003eupgrade your linkage at the same time\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eUpgrade the weak factory suspension triangle with this robust unit from Heavy Hitter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMade from 7075 billet aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3x stronger than OEM Talaria Sting suspension triangle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBlack anodized finish for lasting good looks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eInstalls in less than 20 minutes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDesigned and manufactured in Florida, USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eTalaria Sting\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is the known and tested compatibility for this product. Factory variations, dealer options, and aftermarket modifications could affect compatibility in your specific case. Please verify compatibility to the best of your ability before purchasing.\u003c\/span\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":44116752761073,"sku":"SQ2982324","price":89.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-suspension-default-title-heavy-hitter-reinforced-suspension-triangle-for-talaria-sting-sq2982324-52761073-32615453819121.jpg?v=1773630015"},{"product_id":"heavy-hitter-mx-direct-mount-riser-fat-bar-1-1-8-clamp","title":"Heavy Hitter MX Direct Mount Riser Fat Bar 1 1\/8\" Clamp","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eOur first experiences with Sur Ron, Segway, and Talaria left us wanting better ergonomics. To solve that problem we created our own direct-mount stem with a 1.75” rise and a one-piece handlebar clamp to make installation a breeze. This stem riser is a direct fit for Sur Ron, Segway, and Talaria e-bikes and allows you to run your favorite Fat-bars on your E-Bike. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ability to run Motocross bars on your E-bike is quite possibly the most underrated upgrade. Gone are the days of bending a set of bars during a ride and not having replacements! You can now go to any dealership and keep your weekend going! Not to mention the availability of far more bend options to find your perfect ergonomics! A comfortable rider is a faster rider and safer rider. \u003c\/p\u003e\n\u003cp\u003eWe changed the ergonomics compared to what you typically see on MTB style risers and put the bars directly over the Stem! This is pretty standard in the motorcycle world and for good reason! Steering feel is greatly affected by placing your bars out further then the triple clamps. \u003c\/p\u003e\n\u003cp\u003eFunctional and attractive, the Heavy Hitter MX Riser not only puts your body in a more comfortable position but also gives you better leverage over the front end making the bike more flickable; especially in low-speed situations.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003c\/em\u003e Recommended torque setting for the top clamp is 132 in-lb (11 ft-lbs), tighten each of the 4 bolts evenly to provide an even torque spec across all bolts. You will need to trim your steering tube to the correct length to run this stem! This is ideal for most applications but required for this stem.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMake your e-bike feel more comfortable and precise with this stem riser\u003c\/li\u003e\n\u003cli\u003eDirect mount stem adds 1.75\" of rise to your handlebars, while also repositioning them for better ergonomics\u003c\/li\u003e\n\u003cli\u003eWide clamping area for increased bar stiffness\u003c\/li\u003e\n\u003cli\u003eBuilt strong to withstand abuse and light enough for racing\u003c\/li\u003e\n\u003cli\u003eMade from 7075-T6 Aerospace-grade aluminum with an anodized finish\u003c\/li\u003e\n\u003cli\u003eBolts directly to stock and most aftermarket forks\u003c\/li\u003e\n\u003cli\u003eFits 1 1\/8\" motocross Fat Bars.  28.575 mm Clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSur Ron LBX\u003c\/li\u003e\n\u003cli\u003eSegway X260\u003c\/li\u003e\n\u003cli\u003eTalaria Sting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Part Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFOX 40:\u003c\/strong\u003e 2009+ models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarzocchi:\u003c\/strong\u003e 2013+ 888 and 380 models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRockShox BoXXer:\u003c\/strong\u003e All models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManitou Dorado:\u003c\/strong\u003e All models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther:\u003c\/strong\u003e Most dual crown downhill\/MTB forks (RST Killah, DNM, Fast Ace, etc.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Many of these e-bikes have been offered with a wide range of equipment, both from the factory and from third-party sellers. \u003cstrong\u003ePlease verify fitment with the specific setup of your bike prior to ordering.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eIf you have successfully installed this part on a setup not listed here, please \u003ca href=\"https:\/\/gritshift.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e so we can help others by updating this list.\u003c\/em\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Black","offer_id":44116759675121,"sku":"SQ8942513","price":89.89,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":44116759707889,"sku":"SQ8942514","price":89.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-foot-hand-controls-black-heavy-hitter-mx-direct-mount-riser-fat-bar-1-1-8-clamp-sq8942513-59675121-32615477674225.png?v=1773630020"},{"product_id":"heavy-hitter-titanium-direct-mount-riser-1","title":"Heavy Hitter Titanium Direct Mount Riser","description":"\u003cp\u003eIntroducing the revolutionary Heavy Hitter Titanium Parts. Prepare to elevate your gear and unleash unparalleled performance. \u003c\/p\u003e\n\u003cp\u003eCrafted from Titanium Ti-6Al-4V, this direct mount riser is the ultimate choice for avid thrill-seekers seeking unbeatable strength with minimal weight. Designed as an evolution of our renowned OG riser, it seamlessly blends artistry, performance, and unwavering durability.\u003c\/p\u003e\n\u003cp\u003eEach riser boasts a sleek Jet wash Finish, delivering instant satisfaction with the premium titanium aesthetics we all crave.\u003c\/p\u003e\n\u003cp\u003eDrawing from our own experiences with Sur Ron, Segway, and Talaria, we recognized the need for enhanced ergonomics. To solve this, we developed our own direct-mount stem featuring a 2\" rise and a one-piece handlebar clamp, ensuring effortless installation. This stem riser is specifically tailored for Sur Ron, Segway, and Talaria e-bikes.\u003c\/p\u003e\n\u003cp\u003eBeyond its functional appeal, this riser exhibits an attractive design that not only positions your body in a more comfortable riding stance but also provides enhanced front-end control, making the bike remarkably agile, particularly in low-speed situations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e that if you do not intend to trim your steering tube stem, a stem spacer kit will be required for installation. Once you remove your OEM post-mount stem, we recommend cutting down the stem and utilizing the OEM stem spacer to set the headset preload.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMake your e-bike feel more comfortable and precise with this stem riser\u003c\/li\u003e\n\u003cli\u003eDirect mount stem adds 2” of rise to your handlebars\u003c\/li\u003e\n\u003cli\u003eWide clamping area for increased bar stiffness\u003c\/li\u003e\n\u003cli\u003eBuilt strong to withstand abuse and light enough for racing\u003c\/li\u003e\n\u003cli\u003eMade from \u003cspan data-mce-fragment=\"1\"\u003eTitanium Ti-6Al-4V with a jet wash finish\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBolts directly to stock and most aftermarket forks\u003c\/li\u003e\n\u003cli\u003eFits 31.8mm handlebars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSur Ron LBX\u003c\/li\u003e\n\u003cli\u003eSegway X260\u003c\/li\u003e\n\u003cli\u003eTalaria Sting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Part Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFOX 40:\u003c\/strong\u003e 2009+ models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarzocchi:\u003c\/strong\u003e 2013+ 888 and 380 models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRockShox BoXXer:\u003c\/strong\u003e All models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManitou Dorado:\u003c\/strong\u003e All models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther:\u003c\/strong\u003e Most dual crown downhill\/MTB forks (RST Killah, DNM, Fast Ace, etc.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Many of these e-bikes have been offered with a wide range of equipment, both from the factory and from third-party sellers. \u003cstrong\u003ePlease verify fitment with the specific setup of your bike prior to ordering.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eIf you have successfully installed this part on a setup not listed here, please \u003ca href=\"https:\/\/gritshift.com\/pages\/contact\" data-mce-href=\"https:\/\/gritshift.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e so we can help others by updating this list.\u003c\/em\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":44147653345521,"sku":"SQ6982248","price":329.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-foot-hand-controls-default-title-heavy-hitter-titanium-direct-mount-riser-sq6982248-53345521-32719299707121.jpg?v=1773630076"},{"product_id":"heavy-hitter-billet-crf450-v2-footpeg-brackets","title":"Heavy Hitter Billet CRF450 V2 Footpeg Brackets","description":"\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eDoes not include foot peg or foot peg hardware! This Requires CRF\/CR springs and pins\u003c\/p\u003e\n\u003cp\u003eLet's face the facts; there are so many amazing foot peg options for the main branded motocross bikes, and the price ranges from 20 bucks on amazon to hundreds of dollars if you want to run titanium sets.\u003c\/p\u003e\n\u003cp\u003eWith this comes so many different styled options from large platforms with removable cleats or extended heel support options to more standard platforms.\u003c\/p\u003e\n\u003cp\u003eGritShift decided in order to give the E-bike community the best footpeg option, there was no reason to design multiple footpegs that may or may not suit your needs! So we decided the best route was to design a foot peg bracket that allows you to run foot pegs from many of the best brands using Honda OEM springs and pins.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnodized type 2 Black Finish\u003c\/li\u003e\n\u003cli\u003e7075 Billet aluminum\u003c\/li\u003e\n\u003cli\u003eAbility to run wide range of pegs on your Sur Ron and Talaria\u003c\/li\u003e\n\u003cli\u003eSpring groove retainer for clean install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eSur Ron LBS \/ LBX\u003cbr\u003eSegway X160 \/ X260\u003cbr\u003eTalaria Sting MX3 \/ MX4 \/ MX5\u003cbr\u003eE Ride Pro S \/ SS \/ 2.0 \/ 3.0 \/ SR\u003c\/p\u003e\n\u003cp\u003eThis Bracket will allow you to run foot pegs for these year ranges: \u003cbr\u003eCR125\/250 02-07\u003cbr\u003eCRF150R 07-19\u003cbr\u003eCRF250X 04-19\u003cbr\u003eCRF450R 02-19\u003cbr\u003eCRF450RX 17-19\u003cbr\u003eCRF450X 05-19\u003cbr\u003eCRF250L\/M 12-18\u003cbr\u003eCRF250 Rally 17-18\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":44192052412657,"sku":"SQ6584231V2","price":29.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-foot-hand-controls-default-title-heavy-hitter-billet-crf450-v2-footpeg-brackets-sq6584231v2-52412657-38341813371121.jpg?v=1773630254"},{"product_id":"heavy-hitter-420-primary-o-ring-chain-drive-conversion-kit","title":"Heavy Hitter 420 Primary O-Ring Chain Drive Conversion Kit","description":"\u003cp data-start=\"68\" data-end=\"583\"\u003eThe Heavy Hitter 420 Primary Chain Drive Conversion Kit is the \u003cstrong data-start=\"150\" data-end=\"194\"\u003ehighest-performance chain drive solution\u003c\/strong\u003e for Sur Ron, Segway, E Ride, Ventus, and Falcon platforms. Stock belts might survive casual riding, but when you throw real torque at them, especially with upgraded motors and controllers, they fail. Other chain kits try to solve the problem but bring excess weight, higher resistance, or rubber dampers that actually accelerate chain wear. Heavy Hitter fixes all of it.\u003c\/p\u003e\n\u003cp data-start=\"585\" data-end=\"1130\"\u003eAfter years of testing and breaking parts, we built the \u003cstrong data-start=\"641\" data-end=\"683\"\u003elightest 420 primary kit on the market\u003c\/strong\u003e with the least rotating mass. The setup pairs a \u003cstrong data-start=\"732\" data-end=\"773\"\u003e7075 T6 billet aluminum rear sprocket\u003c\/strong\u003e for weight savings with a \u003cstrong data-start=\"800\" data-end=\"844\"\u003enitrided 52100 tool steel front sprocket\u003c\/strong\u003e for maximum durability. A Japanese non-O-ring chain with master link keeps rolling resistance at a minimum while making swaps and maintenance simple. Unlike rubber-lined sprockets that trap dirt and mud between chain links, this kit is designed for \u003cstrong data-start=\"1094\" data-end=\"1127\"\u003epure efficiency and long life\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"1132\" data-end=\"1588\"\u003eThe conversion maintains OEM motor alignment and gear ratio, with precision machining that extends sprocket life and keeps performance smooth at high RPM. It’s louder than a belt — no avoiding that — but no louder than any other chain kit. And if you want to quiet it down, you can fit an O-ring chain (at the cost of some performance). From stock power setups to high-output EBMX, Sotion, or Torp builds, this kit is \u003cstrong data-start=\"1550\" data-end=\"1585\"\u003erace-proven and built for abuse\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-end=\"1692\" data-start=\"1546\"\u003e⚠️ \u003cstrong data-end=\"1570\" data-start=\"1549\"\u003eImportant Notice:\u003c\/strong\u003e \u003cstrong\u003e \u003c\/strong\u003eWhen installing, make sure your chain tension is loose not tight! Any chain drive that you install should have loose chain tension! Please check the fitment tab for important motor info. \u003ca rel=\"noopener\" title=\"More Info Here\" href=\"https:\/\/gritshift.com\/pages\/primary-drive-info?_pos=1\u0026amp;_sid=0c3890503\u0026amp;_ss=r\" target=\"_blank\"\u003e(MORE INFO HERE)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-start=\"1631\" data-end=\"1645\"\u003e\u003cstrong data-start=\"1631\" data-end=\"1643\"\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1648\" data-end=\"1704\"\u003e7075 T6 billet aluminum rear sprocket (black anodized)\u003c\/li\u003e\n\u003cli data-start=\"1707\" data-end=\"1776\"\u003e52100 tool steel front sprocket with nitrided black surface coating\u003c\/li\u003e\n\u003cli data-start=\"1779\" data-end=\"1840\"\u003eLightest primary kit on the market for maximum performance\u003c\/li\u003e\n\u003cli data-start=\"1843\" data-end=\"1904\"\u003e42-link Japanese non-sealed chain with master link included\u003c\/li\u003e\n\u003cli data-start=\"1907\" data-end=\"1953\"\u003eMaintains OEM gear ratio and motor alignment\u003c\/li\u003e\n\u003cli data-start=\"1956\" data-end=\"2022\"\u003ePrecision-machined for long sprocket life and smooth performance\u003c\/li\u003e\n\u003cli\u003eBest Efficiency Rated Chain Drive on The Market\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/J-YEmDuR_80?si=LshXqBSJ_8vJrs8p\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSur Ron LBX\u003c\/li\u003e\n\u003cli\u003eSegway X160 \/ X260\u003c\/li\u003e\n\u003cli\u003eE Ride Pro-S\u003c\/li\u003e\n\u003cli\u003eE Ride Pro-SS \/ 2.0\u003c\/li\u003e\n\u003cli\u003eVentus ONE+\u003c\/li\u003e\n\u003cli\u003e79Bike Falcon Pro \/ GT\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eEBMX XLB Series Motors MUST be properly shimmed, or else you will have side wear to the sprockets!! \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Notice: \u003c\/strong\u003eWhen installing, make sure your chain tension is not tight! Any chain drive that you install should have loose chain tension!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0511\/3964\/1496\/files\/Heavy_Hitter_420_Primary_Chain_Drive_Conversion_Kit_Assembly_Guide.pdf?v=1772646714\"\u003eDownload Tech Sheet (Assembly \u0026amp; Torque Specs)\u003c\/a\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45291846959345,"sku":"SQ6942420","price":99.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-chain-and-sprocket-kit-default-title-heavy-hitter-420-primary-o-ring-chain-drive-conversion-kit-sq6942420-46959345-38341830443249.jpg?v=1773630925"},{"product_id":"heavy-hitter-520-primary-chain-drive-conversion","title":"Heavy Hitter 520 Primary Chain Drive Conversion","description":"\u003cp\u003eThis kit was designed for riders who want to maximize their bike's performance. As seen on EBMX FIM E-Xplorer race team bikes ridden by Jack Field \u0026amp; Jess Gardiner. This is the lightest kit on the market, which means less rotational mass, and resistance. \u003c\/p\u003e\n\u003cp\u003eThis kit consists of a hybrid sprocket setup, with the rear sprocket being a 7075 T6 Billet with anodized hard coating, and the front sprocket being a machined steel sprocket, heat treated, and counter cut for weight reduction. The chain provided is a Fire Power 520 non-o-ring chain made in Japan for the least amount of rotational resistance. \u003c\/p\u003e\n\u003cp\u003eThis primary drive is not a stealth riding kit. This kit is loud but no louder than your typical primary kit. If you're looking for something functional that has been heavily tested this is your kit!\u003c\/p\u003e\n\u003cp\u003eWe do not vulcanize rubber onto our kits because of two simple reasons, Efficiency loss, additional heat \u0026amp; wear. Adding rubber rings on a sprocket will result in a small degree of elasticity which means a loss of power transfer, also reducing the directness of power transfer. The rubber sprocket rings will accelerate chain wear due to additional friction to chain links, and to also include you now have a shelf for debris to sit on for the chain to roll over to pack into the links since there is no place for debris to evacuate to.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation and detailed setup info \u003ca href=\"https:\/\/gritshift.com\/pages\/primary-drive-info\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e Please ensure all hardware is tightened \u0026amp; loctite is applied.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExclusive dished sprocket design for proper clearance\u003c\/li\u003e\n\u003cli\u003e520 non-sealed Japanese Chain included for long-term reliability and reduced rotating mass\u003c\/li\u003e\n\u003cli\u003e7075 aluminum design rear sprocket for reduced rotating mass\u003c\/li\u003e\n\u003cli\u003eLightweight Counter Cut Steel heat-treated front sprocket for added life and wear properties\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaster link chain for easy chain swaps when it is time for maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/J-YEmDuR_80?si=LshXqBSJ_8vJrs8p\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eSur Ron Ultra Bee OEM Motor\u003cbr\u003eSur Ron Ultra Bee EBMX V1 \u0026amp; V2 XUB-80 Motor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Notice: \u003c\/strong\u003eFor EBMX \u0026amp; OEM Motor ONLY! Some Aftermarket Motors may have an offset difference, check your chain alignment before riding, most aftermarket motors include shims for proper installation. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is the known and tested compatibility for this product. Factory variations, dealer options, and aftermarket modifications could affect compatibility in specific cases. Please verify compatibility to the best of your ability before purchasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0511\/3964\/1496\/files\/Heavy_Hitter_520_Primary_Drive_Conversion_OEMEBMX_Ultra_Motors_Assembly_Guide.pdf?v=1772216005\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDownload Tech Sheet (Assembly \u0026amp; Torque Specs)\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45291846926577,"sku":"SQ798285","price":112.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-default-title-heavy-hitter-520-primary-chain-drive-conversion-sq798285-46926577-38341830050033.jpg?v=1773630927"},{"product_id":"heavy-hitter-520-ultra-bee-sprocket","title":"Heavy Hitter 520 Ultra Bee Sprocket","description":"\u003cp\u003eWant to get that grunt out of the corner on your Ultra Bee, then look no further with the Heavy Hitter Ultra Bee sprockets. \u003c\/p\u003e\n\u003cp\u003eThese sprockets are built from one piece 7075 T6 aluminum and machined with precision to fit your bike. This is the perfect upgrade for riders who have heavier off-road tires or are looking at 18\/21 inch wheel sets. The bike becomes a bit lazy with the heavier wheels and tires and picking one of our exclusive sprockets will give you that pick up back. \u003c\/p\u003e\n\u003cp\u003eThis will also reduce chances of overheating the stock motor and controller, as we know the weight will increase the load required to turn the wheel, and re-gearing your bike to handle the weight is important to ensure long-term performance. \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight 7075 T6 design\u003c\/li\u003e\n\u003cli\u003eMatched style to Heavy Hitter rotors\u003c\/li\u003e\n\u003cli\u003eHigh-quality black anodizing\u003c\/li\u003e\n\u003cli\u003eBeveled edges for smooth chain engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSur Ron Ultra Bee\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GritShift","offers":[{"title":"58","offer_id":45291847123185,"sku":"SQ894249","price":62.99,"currency_code":"USD","in_stock":true},{"title":"54","offer_id":45291847090417,"sku":"SQ894248","price":64.99,"currency_code":"USD","in_stock":true},{"title":"50","offer_id":45291847057649,"sku":"SQ894247","price":56.69,"currency_code":"USD","in_stock":true},{"title":"60","offer_id":45291847155953,"sku":"SQ894250","price":60.29,"currency_code":"USD","in_stock":true},{"title":"46","offer_id":45291847024881,"sku":"SQ894246","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-58-heavy-hitter-520-ultra-bee-sprocket-sq894249-47123185-34345960472817.png?v=1773630932"},{"product_id":"heavy-hitter-surron-v2-skid-plate","title":"Heavy Hitter Surron V2 Skid Plate","description":"\u003cp\u003e\u003cstrong\u003eLifetime Warranty\u003c\/strong\u003e: \u003cem\u003e\"Side Rails Only\" We are so confident in this skid plate that we will replace the side rails if they ever bend for FREE!\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e(Not applicable to bash plates, replacements are available upon request).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eHeavy Hitter has redesigned your favorite skid plate to all motors, Re-optimized bash plate angles for enduro, and a tighter fitment to all controllers to protect your phase wires from sticks and rocks. This new V2 skidplate only weighs 3.4 pounds, and also adds rigidity to your frame.\u003c\/p\u003e\n\u003cp\u003eWith 7075 T6 billet aluminum side supports and replaceable bash plates, the Heavy Hitter Skid Plate can withstand 6,000 lbs of impact force, making it the end-all protection solution for that pricy upgraded motor, or even an OEM motor. Whereas plastic skidplates still flex and can come into contact with your motor, potentially causing damage to breaking motor mounts and motor cases.\u003c\/p\u003e\n\u003cp\u003eThe bash plate angles have been thoroughly tested to eliminate as much drag and momentum loss when trying to slide over an obstacle or when bashing into something like a log or a rock. During TKO hard enduro training, we discovered that the aluminum skidplates actually skid over rocks and logs much easier than plastic since sharp surfaces can't embed themselves into the skidplate, creating more drag.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eWeight: 3.42 LBS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe most robust, over-engineered skid plate on the market for your e-moto\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMade from 7075 T6 billet aluminum with a 10mm bash plate tested to withstand over 6,000 pounds of force\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eStrategic ventilation slats keep your motor cool while ensuring maximum protection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eExtended tail section offers enhanced protection from perpendicular strikes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eEach section is easily removable for routine bike maintenance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eReplaceable bash plate can be exchanged in minutes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSur Ron LBX\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSur Ron S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSegway X160\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSegway X260\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis is the known and tested compatibility for this product. Factory variations, dealer options, and aftermarket modifications could affect compatibility in your specific case. Please verify compatibility to the best of your ability before purchasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eGuides\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0511\/3964\/1496\/files\/Heavy_Hitter_Surron_V2_Skid_Plate_Assembly_Guide.pdf?v=1772216005\"\u003eDownload Tech Sheet (Assembly \u0026amp; Torque Specs)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInstallation note:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003eWe recommend using a blue medium thread locker on all hardware during installation. Mounting bolts are T20 Torx bolts; the recommended torque value is\u003c\/span\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e2.6 Nm \/ 1.92 ft-lb \/ 23 in-lb\u003c\/b\u003e\u003cspan\u003e. This is barely hand-tight, but as long as the blue medium thread locker is used and correctly applied, this will hold securely and be removable.\u003c\/span\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Red","offer_id":45932246368497,"sku":"SQ9842684RE","price":219.89,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":45932242436337,"sku":"SQ9842684GL","price":219.89,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":45291847254257,"sku":"SQ9842682","price":219.89,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":45291847287025,"sku":"SQ9842684","price":219.89,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":45932214223089,"sku":"SQ9842684PU","price":219.89,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":45932247613681,"sku":"SQ9842684BL","price":219.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-frame-swingarm-black-heavy-hitter-surron-v2-skid-plate-sq9842684-47287025-38341831688433.jpg?v=1773630932"},{"product_id":"heavy-hitter-240mm-brake-rotor-surron-ultra-bee-front-rear","title":"Heavy Hitter 240mm Brake Rotor - Surron Ultra Bee Front\/Rear","description":"\u003cp\u003eUpgrade your Surron Ultra Bee's braking performance with the Heavy Hitter 240mm brake rotor. Engineered for riders who demand superior stopping power and reliability, this premium stainless steel rotor delivers race-proven performance whether you're hitting the trails or navigating city streets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Stopping Power\u003c\/strong\u003e – Engineered rotor design provides confident, progressive braking in all conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Steel Construction\u003c\/strong\u003e – Premium material ensures exceptional longevity and strength under hard use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Heat Dissipation\u003c\/strong\u003e – Advanced cooling design prevents overheating and brake fade during aggressive riding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e240mm Rotor Size\u003c\/strong\u003e – Optimized diameter for maximum braking leverage and control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignature Heavy Hitter Styling\u003c\/strong\u003e – Precision-cut design matches Heavy Hitter sprocket aesthetics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSurron Ultra Bee (front or rear wheel)\u003c\/li\u003e\n\u003cli\u003eDirect replacement for stock rotors\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM brake calipers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e Stock rotors are adequate for casual riding, but the Heavy Hitter rotor transforms your Ultra Bee's braking performance with improved modulation, fade resistance, and overall stopping confidence. Essential for riders who push their bikes hard or carry additional weight from upgrades and cargo.\u003c\/p\u003e\n\u003cp\u003eDesigned and manufactured to exacting standards, the Heavy Hitter rotor delivers the performance and reliability serious riders demand.\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45291847221489,"sku":"SQ625868","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-default-title-heavy-hitter-ultra-bee-f-r-brake-rotor-upgrade-sq625868-47221489-34345959882993.jpg?v=1773630941"},{"product_id":"heavy-hitter-ultra-bee-linkage","title":"Heavy Hitter Ultra Bee Linkage","description":"\u003cp\u003eIntroducing the Heavy Hitter Ultra Bee Linkage - Elevate Your Sur-Ron Ultra Bee Experience!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAre you ready to take your Sur-Ron Ultra Bee to the next level? Look no further than the Heavy Hitter Ultra Bee Linkage, a high-performance aluminum rear shock linkage designed to supercharge your off-road adventures. Crafted with precision engineering and tailored for the Sur-Ron Ultra Bee, this linkage upgrade should transform your riding experience like never before.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCrafted from robust 7075T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eStainless Steel Bearing sleeve, increased strength, and long-term wear properties\u003c\/li\u003e\n\u003cli\u003ePress fit nylon bearing seals for increased water ingress protection\u003c\/li\u003e\n\u003cli\u003eNo bushing drag on the sleeve for optimal suspension performance\u003c\/li\u003e\n\u003cli\u003eBlack anodized finish\u003c\/li\u003e\n\u003cli\u003eThis linkage optimizes your bike's suspension system for improved off-road handling.\u003c\/li\u003e\n\u003cli\u003eLocalized thickening in critical areas maximizes strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eSur Ron Ultra Bee\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0511\/3964\/1496\/files\/Heavy_Hitter_Ultra_Bee_Racing_Linkage_Assembly_Guide.pdf?v=1772216005\"\u003eDownload Tech Sheet (Assembly \u0026amp; Torque Specs)\u003c\/a\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45291847319793,"sku":"SQ5826489","price":99.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-default-title-heavy-hitter-ultra-bee-linkage-sq5826489-47319793-38341829886193.jpg?v=1773630944"},{"product_id":"gritshift-heavy-hitter-adjustable-billet-display-mount-e-ride-pro-talaria","title":"GritShift Heavy Hitter Adjustable Billet Display Mount – E Ride Pro \/ Talaria","description":"\u003ch2\u003eGritShift Heavy Hitter Adjustable Billet Display Mount\u003c\/h2\u003e\u003cp\u003eStop compromising your OEM display mount. The \u003cstrong\u003eGritShift Heavy Hitter\u003c\/strong\u003e is a purpose-built, \u003cstrong\u003e7075 billet aluminum display mount\u003c\/strong\u003e designed for E Ride Pro and ChangCheng display-equipped E-Motos. Its multi-position adjustment system lets you run the display forward, middle, or back — always angled directly toward the rider — while remaining fully compatible with direct mount stems.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-position adjustment\u003c\/strong\u003e — mount forward, middle, or rear with screen angle optimized for each position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7075 billet aluminum construction\u003c\/strong\u003e — lightweight, rigid, and built to handle trail abuse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e31.8mm handlebar clamp\u003c\/strong\u003e — fits standard bars; shim kit required for true moto bars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-sided mount\u003c\/strong\u003e — compatible with the majority of direct mount stems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-minute install\u003c\/strong\u003e — quick and seamless, no drilling or permanent modifications\u003c\/li\u003e\n\u003cli\u003eProtects your display from OEM mount failure points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eE Ride Pro-S\u003c\/li\u003e\n\u003cli\u003eE Ride Pro-SS \/ 2.0 \/ 3.0 \/ SR\u003c\/li\u003e\n\u003cli\u003eTalaria with upgraded ChangCheng Display\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Fits any bike using a ChangCheng display with 31.8mm handlebars. True moto bar users will need a shim kit (sold separately).\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0511\/3964\/1496\/files\/Heavy_Hitter_Adjustable_Billet_Display_Mount_Assembly_Guide.pdf?v=1772216005\"\u003e📄 Download Assembly Guide \u0026amp; Torque Specs (PDF)\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e GritShift\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e SQ9268452\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 7075 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamp Diameter:\u003c\/strong\u003e 31.8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.56 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHS Code:\u003c\/strong\u003e 871410\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45291847352561,"sku":"SQ9268452","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-default-title-heavy-hitter-adjustable-billet-display-mount-sq9268452-47352561-38341830803697.jpg?v=1773630947"},{"product_id":"heavy-hitter-ultra-bee-triangle","title":"Heavy Hitter Ultra Bee Triangle","description":"\u003cp\u003eIntroducing the Heavy Hitter Ultra Bee Triangle. This will be your first and last triangle upgrade, as we have tested this with all shocks on the market to make sure the fit is with no issues. And we have thrashed on this triangle and also our linkage for 2 years straight with a pro-level team rider racing his bike equipped with Heavy Hitter Suspension parts.\u003c\/p\u003e\n\u003cp\u003eThe Heavy Hitter Triangle has been CAD tested up to 10,000 lbs of static force after reducing as much weight as possible, so fatigue is out of the question for this unit. Whereas most competing products have never even been tested and are only designed to look good.\u003c\/p\u003e\n\u003cp\u003eWe truly believe the product's function is the most important with our Heavy Hitter product line, then we try to make them aesthetically pleasing. If you want something that will never have a chance of leaving you stranded on the side of the track or trail, this triangle is for you.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e7075 T6 aluminum \u003c\/li\u003e\n\u003cli\u003eBlack anodized for superior finish quality\u003c\/li\u003e\n\u003cli\u003eEngineered for reduced bushing drag when used with Heavy hitter linkage\u003c\/li\u003e\n\u003cli\u003eSeamless install in a few minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eSur Ron Ultra Bee\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45291847385329,"sku":"SQ6945685","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-default-title-heavy-hitter-ultra-bee-triangle-sq6945685-47385329-38341831491825.jpg?v=1773630950"},{"product_id":"heavy-hitter-4340-chromoly-upgraded-jackshaft-bolt","title":"Heavy Hitter 4340 Chromoly Upgraded JackShaft Bolt","description":"\u003cp\u003eCrafted from heat-treated 4340 Chromoly steel, this jackshaft bolt is engineered for unmatched strength and durability over the OEM. We have tested Titanium, \u0026amp; Grade 12.9, which work well but due to their metal elements, they become brittle and snap rather than bend, which results in being stuck on the side of the trail. This is the reason we chose to use 4340 Chromoly Steel, as it is stronger than the OEM hardware, and it eliminates the risk of snapping completely in the event of a hard jump case or hardcore riding. A 6mm Allen and 14mm hex nut on the shaft ensures easy installation. This upgrade offers reliable performance and durability.\u003c\/p\u003e\n\u003cp\u003eSomething EVERYONE should know that's pushing the limits on there E Ride 1.0 or 2.0 E rides design is not perfect, they are limited any aftermarket bolt shaft size to 10MM which is very small. So no matter what material bolt you are using if you're a big sender or a thrasher, you will likely bend anything on the market. And you will likely bend your swingarm unknowingly. Best way to know if your swingarm is bent or has flexed hard enough to be damaged? Have you ever derailed your chain and not actually hit anything? Well, that's swingarm flex... And that is all lateral load going right to your jackshaft and bolt each time.\u003cbr\u003e\u003cbr\u003eOur Ultimate fix for this is the Rogue swingarm, with a complete redesign on how the swingarm bolt and jackshaft is secured. Learn more \u003ca href=\"https:\/\/gritshift.com\/collections\/e-ride-pro-ss\/products\/heavy-hitter-rogue-stock-length-e-ride-billet-swingarm\" title=\"HH Rogue Swingarm\"\u003eHERE!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTurned from 4340 Chromoly Steel\u003c\/li\u003e\n\u003cli\u003e6mm Allen and 14mm hex nut on the shaft ensures easy install\u003c\/li\u003e\n\u003cli\u003eHeat treated for additional durability and hardness\u003c\/li\u003e\n\u003cli\u003eIncludes flange nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-SS \/ 2.0\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45511075102961,"sku":"SQ2984356","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-default-title-heavy-hitter-4340-chromoly-upgraded-jackshaft-bolt-sq2984356-75102961-38341830377713.jpg?v=1773631044"},{"product_id":"heavy-hitter-4340-chromoly-upgraded-rear-axle","title":"Heavy Hitter 4340 Chromoly Upgraded Rear Axle","description":"\u003cp\u003eCrafted from heat-treated 4340 Chromoly steel, this axle is engineered for unmatched strength and durability, capable of withstanding extreme conditions without bending, breaking, or snapping. A 6mm Allen and 12mm hex nut on the shaft ensures easy installation. This axle upgrade offers reliable performance and durability.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTurned from 4340 Chromoly Steel\u003c\/li\u003e\n\u003cli\u003e6mm Allen and 12mm hex nut on the shaft ensures easy install\u003c\/li\u003e\n\u003cli\u003e17mm hex flange nut included \u003c\/li\u003e\n\u003cli\u003eHeat treated for additional durability and hardness\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-SS \/ 2.0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-SS 3.0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-SR\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: Does not work with Warp 9 axle block capture cover.\u003c\/span\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45511075135729,"sku":"SQ2984256","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-default-title-heavy-hitter-4340-chromoly-upgraded-rear-axle-sq2984256-75135729-38341831426289.jpg?v=1773631044"},{"product_id":"heavy-hitter-4140-chromoly-e-ride-linkage-triangle-shock-bolt-upgrade-kit","title":"Heavy Hitter 4140 Chromoly E Ride Linkage\/Triangle\/Shock Bolt Upgrade Kit","description":"\u003cp\u003eTrying to find any weak points, or failures testing our adjustable height \u003ca href=\"https:\/\/gritshift.com\/collections\/e-ride-pro-ss\/products\/heavy-hitter-adjustable-suspension-triangle\" title=\"E Ride Adjustable Triangle\"\u003eE Ride Triangle Upgrade\u003c\/a\u003e we quickly realized how much all of the OEM suspension hardware bent, making it very difficult to remove. We even managed to bend the rear axle a significant amount, which is how the Heavy Hitter Chromoly bolt kit came to life!\u003c\/p\u003e\n\u003cp\u003eCrafted from heat-treated 4140 Chromoly steel, these bolts are engineered for unmatched strength and durability, capable of withstanding extreme conditions without bending, breaking, or snapping. This upgrade replaces all rear suspension hardware (Triangle, linkage, shock bolts.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTurned 4140 Chromoly Steel heat treated for added strength\u003c\/li\u003e\n\u003cli\u003eIncludes all hardware for the rear suspension system \"Triangle, Linkage, Shock\" (bolts, \u0026amp; flange nuts)\u003c\/li\u003e\n\u003cli\u003e6mm Allen and 12mm hex head for easy removal of all bolts\u003c\/li\u003e\n\u003cli\u003eDesigned for the Senders who are tired of bending or breaking other hardware\u003c\/li\u003e\n\u003cli\u003eBlack oxide Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-SS 2.0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-SS 3.0\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-SR\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0511\/3964\/1496\/files\/Heavy_Hitter_4140_Chromoly_E_Ride_Linkage_Triangle_Shock_Bolt_Upgrade_Kit_Assembly_Guide.pdf?v=1772216004\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDownload Tech Sheet (Assembly \u0026amp; Torque Specs)\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45516939395313,"sku":"SQ2984262","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-suspension-default-title-heavy-hitter-4140-chromoly-e-ride-linkage-triangle-shock-bolt-upgrade-kit-sq2984262-39395313-38341830738161.jpg?v=1773631050"},{"product_id":"heavy-hitter-adjustable-suspension-triangle","title":"Heavy Hitter Adjustable Suspension Triangle","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFirst of its kind a 2 in 1 adjustable height suspension triangle! The Heavy Hitter E Ride Triangle design has been extensively tested via Static, and Dynamic CAD stress analysis up to 5,000 pounds of force! As well as being field-tested for months before release, on MX tracks, Hard Enduros, and even hare scramble races. \u003cbr\u003e\u003cbr\u003eThe triangle was designed to retain OEM height, or lift the rear up to 1 inch! Some may ask why you want to keep the OEM rear height or lift the rear by 1\/2 inch or 1 inch. Well, it all comes down to preference and riding style\/terrain. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eHere are some examples: if you keep the OEM 19\" front wheel and decide to put a 16\" rear wheel, you might want to raise the rear a little to level the bike out. Or in that same exact instance, you might be riding your bike out in the dunes in soft, fast-paced terrains, and you might want to retain the OEM rear lift height so you can have the increased steering trail\/rake angle to give you better steering stability. And to think you can do these adjustments with just one part! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eTested by both MX riders and Hard Enduro Riders, the Heavy Hitter suspension triangle has a reinforced billet aluminum construction that can handle the gnarliest conditions all while packing the powerhouse punch of adjustability in one part. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eDon't be fooled by the copycat triangles. It's pretty scary seeing some of the other products on the market that break due to copying our product and not knowing the complexity of getting this right.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e7075 T6 Billet Aluminum \u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e304 Stainless Steel Token Inserts For stock 0\", 0.50\", and 1.00\" lift. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBlack Anodized Extreme Durable Oxide Finish to Prevent Corrosion\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eWorks With OEM Linkage or Aftermarket Linkage \u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncrease Tolerances to Prevent Natural Suspension Slop\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eInstall in Less Than 20 Minutes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3 Height Adjustments Stock, + 1\/2 inch,  +1 Inch\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-SS 2.0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-SS 3.0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-SR\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is the known and tested compatibility for this product. Factory variations, dealer options, and aftermarket modifications could affect compatibility in your specific case. Please verify compatibility to the best of your ability before purchasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0511\/3964\/1496\/files\/Heavy_Hitter_Adjustable_Height_E_Ride_Suspension_Triangle_Assembly_Guide.pdf?v=1772216005\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDownload Tech Sheet (Assembly \u0026amp; Torque Specs)\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45516939428081,"sku":"SQ1948256","price":169.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-suspension-default-title-heavy-hitter-adjustable-suspension-triangle-sq1948256-39428081-38341832245489.jpg?v=1773631051"},{"product_id":"gritshift-heavy-hitter-e-ride-skid-plate-7075-billet-aluminum-motor-protection","title":"GritShift Heavy Hitter E-Ride Skid Plate – 7075 Billet Aluminum Motor Protection","description":"\u003cp\u003e\u003cstrong\u003eThe last skid plate your E Ride Pro will ever need.\u003c\/strong\u003e The GritShift Heavy Hitter Skid Plate is engineered from 7075 T6 billet aluminum with a 10mm replaceable bash plate rated to withstand over 6,000 lbs of impact force — built for hard enduro riders who refuse to let terrain slow them down.\u003c\/p\u003e\n\n\u003cp\u003eWeighing just 3 lbs, this skid plate delivers maximum motor protection without unnecessary bulk. Optimized bash plate angles minimize slide resistance on rocks and logs, and strategic ventilation slats keep your motor cool under sustained abuse. Unlike plastic alternatives, the aluminum surface doesn't embed debris on impact — it slides clean.\u003c\/p\u003e\n\n\u003cp\u003eDual front bash plates accommodate both OEM and aftermarket controllers for a tight, rattle-free fit that shields your phase wires and motor housing from sticks, rocks, and hard landings. Every section is tool-removable for routine maintenance, and the bash plate swaps out in minutes.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTKO Tested. GritShift Approved.\u003c\/strong\u003e These skid plates survived the Red Bull Tennessee Knockout Hard Enduro — dozens of miles of rocky step-ups, big drops, log jumps, and rhythm obstacles. They held up. Yours will too.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eLifetime Warranty on Side Rails\u003c\/strong\u003e — if they ever bend, we replace them for free. Replacement bash plates available upon request.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 lbs (1.36 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 7075 T6 billet aluminum side rails + 10mm replaceable bash plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact Rating:\u003c\/strong\u003e 6,000+ lbs of force\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e T20 Torx mounting bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque Spec:\u003c\/strong\u003e 2.6 Nm \/ 1.92 ft-lb \/ 23 in-lb (use blue medium thread locker)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMost robust, over-engineered e-bike skid plate on the market\u003c\/li\u003e\n\u003cli\u003eOptimized bash plate angles for minimal drag on rocks and logs\u003c\/li\u003e\n\u003cli\u003eStrategic ventilation slats for motor cooling\u003c\/li\u003e\n\u003cli\u003eDual front bash plates — fits OEM and aftermarket controllers\u003c\/li\u003e\n\u003cli\u003eFull phase wire and motor housing protection\u003c\/li\u003e\n\u003cli\u003eEach section removable for easy maintenance\u003c\/li\u003e\n\u003cli\u003eReplaceable bash plate swaps in minutes\u003c\/li\u003e\n\u003cli\u003eLifetime warranty on side rails\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e E Ride Pro S \/ SS \/ 2.0 \/ 3.0 \/ SR\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThis is the known and tested compatibility for this product. Factory variations, dealer options, and aftermarket modifications could affect compatibility in your specific case. Please verify compatibility before purchasing.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e Use blue medium thread locker on all hardware. Mounting bolts are T20 Torx; torque to \u003cstrong\u003e2.6 Nm \/ 1.92 ft-lb \/ 23 in-lb\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0511\/3964\/1496\/files\/Heavy_Hitter_E-Ride_Skid_Plate_Assembly_Guide.pdf?v=1772216004\"\u003eDownload Tech Sheet (Assembly \u0026amp; Torque Specs)\u003c\/a\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Purple","offer_id":45932254658801,"sku":"SQ8945264PU","price":249.89,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":45932257837297,"sku":"SQ8945264GL","price":249.89,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":45932258394353,"sku":"SQ8945264RE","price":249.89,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":45516939493617,"sku":"SQ8945264","price":249.89,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":45516939460849,"sku":"SQ8945263","price":249.89,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":45932259016945,"sku":"SQ8945264BL","price":249.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-frame-swingarm-black-heavy-hitter-e-ride-skid-plate-sq8945264-39493617-38341830967537.jpg?v=1773631053"},{"product_id":"heavy-hitter-billet-suspension-linkage-upgrade","title":"Heavy Hitter Billet Suspension Linkage Upgrade","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eHeavy Hitter has produced an amazing upgrade for your favorite E-Moto. The rear suspension linkage is a known weak point on stock E-Moto suspension setups. So it's best to upgrade before a failure that could damage your shock and other parts of your bike.\u003cbr\u003e\u003cbr\u003eWe have done an intensive amount of testing on this linkage setup, between bearing types, bearing sleeve material and thickness, as well as material hardness tests to find out what would be the best balance for the E Ride. Don't be fooled by most of the copycat brands. They certainly don't test their products like we do. \u003c\/p\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003eThis linkage upgrade does retain OEM height. We discovered making height adjustments on the linkage would affect the geometry and articulation negatively. So we retained the OEM mounting positions on this linkage and have made adjustments to our upgraded Triangle\u003c\/p\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003eDesigned for competitive racing and off-road use, our linkage ensures optimal clearance and accurate progression geometry for improved performance in the toughest riding terrain. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Always grease your bearings before installing!\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from 7075 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eHardened Steel bushings for a precision no-slop fit\u003c\/li\u003e\n\u003cli\u003ePre-assembled with new bearings, bushings, and seals (Don't forget to grease before installation)\u003c\/li\u003e\n\u003cli\u003eImproved quality and strength\u003c\/li\u003e\n\u003cli\u003eSimple installation takes 20 minutes or less\u003c\/li\u003e\n\u003cli\u003eType 2 black anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-SS 2.0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-SS 3.0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-SR\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: Does not work with EBMX Swingarm Upgrade\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is the known and tested compatibility for this product. Factory variations, dealer options, and aftermarket modifications could affect compatibility in your specific case. Please verify compatibility to the best of your ability before purchasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0511\/3964\/1496\/files\/Heavy_Hitter_E_Ride_Billet_Suspension_Linkage_Upgrade_Assembly_Guide.pdf?v=1772216004\"\u003eDownload Tech Sheet (Assembly \u0026amp; Torque Specs)\u003c\/a\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45516939526385,"sku":"SQ1248264","price":96.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-suspension-default-title-heavy-hitter-billet-suspension-linkage-upgrade-sq1248264-39526385-38341830279409.jpg?v=1773631059"},{"product_id":"heavy-hitter-big-sender-e-ride-85-mx-fork-conversion-kit","title":"Heavy Hitter Big Sender E Ride 85 MX Fork Conversion Kit","description":"\u003cp\u003eIf you're one of the few riders who wants to push your E Ride to the absolute limit – far beyond what the stock mountain bike-derived front end can handle, we introduce the Heavy Hitter 85MX Conversion Kit!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis precision machined CNC 7075 aluminum bearing cup kit, allows a tight press fit to your frame's steer tube. This kit comes with new bearings, and cups, which will completely replace your OEM cups and bearings. You will only need to source your own KTM, Gas Gas, or Beta, complete 85cc front end, which will allow you to use the forks, triples, wheel, and brake. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWe found the 85cc KTM platforms are sprung very accurately for the weight of the E-Bike, especially factoring in the added weight of an upgraded bike. If you’re at this point in your build, you have probably added about 20+ pounds to your bike already from a bigger battery and additional accessories, and the Big Sender kit is the icing on the cake.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFix all your problems.\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e Not only does this kit let you tack on a far more robust set of forks, you can also dial in your settings in ways MTB forks cannot. You can now run your choice of KTM 85 MX forks and a wider variety of front wheels, and the short service intervals of the OEM front forks are eliminated. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eTake your e-bike to another level of capability with the Heavy Hitter Big Sender kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eConvert your e-bike to run real MX forks from a KTM 85\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eEliminate weak failure points and short service intervals of OEM front-end\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eGain the ability to dial in settings for your weight and riding style\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePre-pressed bearing races for simple install\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Aia4NZvQvzY?si=JWL1-7tUZnK32dd0\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTechnical Notes\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eA complete KTM 85 MX front end is required.\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e This usually ranges from $799 to $2,599. A complete front end consists of fork tubes, triple clamps, front braking system, front wheel (19\" recommended), front axle, and MX style handlebars. Price is largely dependent on which fork style you choose: Dual cartridge spring forks are heavier but cheaper, whereas air forks found on 2018+ models are lighter but more expensive. From our experience, we would choose air forks every time.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003eE Ride Pro-S\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eE Ride Pro-SS 2.0\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eE Ride Pro-SS 3.0\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eE Ride Pro-SR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cstrong\u003eNOTE: Requires KTM Front End.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is the known and tested compatibility for this product. Factory variations, dealer options, and aftermarket modifications could affect compatibility in your specific case. Please verify compatibility to the best of your ability before purchasing.\u003c\/span\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45516939624689,"sku":"SQ2894526","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/gritshift-suspension-default-title-heavy-hitter-big-sender-e-ride-85-mx-fork-conversion-kit-sq2894526-39624689-34708213006577.jpg?v=1773631061"},{"product_id":"heavy-hitter-talaria-sting-billet-suspension-triangle","title":"Heavy Hitter Talaria Sting Billet Suspension Triangle","description":"\u003cp\u003eEver feel like your Sting’s rear suspension just isn’t up to the task? Get ahead of potential failure by upgrading your Sting’s suspension triangle to this robust unit from Heavy Hitter.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ePushing a stock Talaria Sting through challenging terrain like big jumps and rough rocks can break the stock triangle surprisingly easily. That weak cast aluminum piece just can’t take the heavy load from hard landings over time or the constant barrage of impacts on a hard enduro course. People have even caused damage from just hopping curbs and living the stunt life, and if your suspension triangle breaks, you’re walking home.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eTested by both stunters and hard enduro riders, the Heavy Hitter suspension triangle has a reinforced billet aluminum construction that can handle the gnarliest conditions. To really beef up your Sting’s rear suspension, \u003ca href=\"https:\/\/gritshift.com\/products\/gritshift-billet-reinforced-suspension-linkage\"\u003eupgrade your linkage at the same time\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eUpgrade the weak factory suspension triangle with this robust unit from Heavy Hitter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMade from 7075 billet aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3x stronger than OEM Talaria Sting suspension triangle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBlack anodized finish for lasting good looks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eInstalls in less than 20 minutes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDesigned and manufactured in Florida, USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eTalaria Sting MX3 \/ MX4 \/ MX5\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0511\/3964\/1496\/files\/Heavy_Hitter_Talaria_Sting_Billet_Suspension_Triangle_Assembly_Guide.pdf?v=1772216004\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDownload Tech Sheet (Assembly \u0026amp; Torque Specs)\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":47036651733233,"sku":"SQ2982324","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/TalariaStingSuspensionTriangleUpgrade2.jpg?v=1761015532"},{"product_id":"heavy-hitter-talaria-billet-suspension-linkage","title":"Heavy Hitter Talaria Billet Suspension Linkage","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eHeavy Hitter has produced an amazing upgrade for your favorite e-bike. The rear suspension linkage is a known weak point in your Talaria stock suspension setup. Many riders have complained about suspension noise and play since the bike was released. That play means it's only a matter of time until bearing and linkage failure comes.\u003c\/p\u003e\n\u003cp\u003eOur linkage is designed with 4mm of shock preload. Your linkage will lightly rest on the swingarm at full droop with the rear wheel off the ground. This is a huge advantage for all bikes! None of our E-Moto rear shocks include a top-out control it's impossible to fit due to the size constraints. Unfortunately, this leads to the shock shaft and seals slamming into the shock body at full droop. If this happens continuously, it will prematurely blow out your suspension seals and rebound control.\u003c\/p\u003e\n\u003cp\u003eTo prevent premature shock wear, we have designed the linkage to have a 4mm top-out stop, similar to limiting straps found on Trophy trucks and side by sides. This will greatly increase the life of your shock and components, especially for heavier riders needing 550-650 lb. springs, and guys that love sending big jumps. \u003c\/p\u003e\n\u003cp\u003eThis will only fit the correct 10.5 x 3.5-inch and smaller shocks! Longer shocks are not advised. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Always grease bearings before installing!\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from 7075 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eSteel bushings for a precision no-slop fit\u003c\/li\u003e\n\u003cli\u003ePre-assembled with new bearings, bushings, and seals (Please Grease Before Install)\u003c\/li\u003e\n\u003cli\u003eImproved quality and strength!\u003c\/li\u003e\n\u003cli\u003eSimple installation takes 20 minutes or less\u003c\/li\u003e\n\u003cli\u003eType 2 black anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eTalaria Sting MX3 \/ MX4 \/ MX5\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":47036651798769,"sku":"SQ9832654","price":82.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/TalariaStingSuspensionLinkageUpgrade1.jpg?v=1761015532"},{"product_id":"heavy-hitter-titanium-direct-mount-riser","title":"Heavy Hitter Titanium Direct Mount Riser","description":"\u003cp\u003eIntroducing the revolutionary Heavy Hitter Titanium Parts. Prepare to elevate your gear and unleash unparalleled performance. \u003c\/p\u003e\n\u003cp\u003eCrafted from Titanium Ti-6Al-4V, this direct mount riser is the ultimate choice for avid thrill-seekers seeking unbeatable strength with minimal weight. Designed as an evolution of our renowned OG riser, it seamlessly blends artistry, performance, and unwavering durability.\u003c\/p\u003e\n\u003cp\u003eEach riser boasts a sleek Jet wash Finish, delivering instant satisfaction with the premium titanium aesthetics we all crave.\u003c\/p\u003e\n\u003cp\u003eDrawing from our own experiences with Sur Ron, Segway, and Talaria, we recognized the need for enhanced ergonomics. To solve this, we developed our own direct-mount stem featuring a 2\" rise and a one-piece handlebar clamp, ensuring effortless installation. This stem riser is specifically tailored for Sur Ron, Segway, and Talaria e-bikes.\u003c\/p\u003e\n\u003cp\u003eBeyond its functional appeal, this riser exhibits an attractive design that not only positions your body in a more comfortable riding stance but also provides enhanced front-end control, making the bike remarkably agile, particularly in low-speed situations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e that if you do not intend to trim your steering tube stem, a stem spacer kit will be required for installation. Once you remove your OEM post-mount stem, we recommend cutting down the stem and utilizing the OEM stem spacer to set the headset preload.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eProper torque settings are essential for the safe and reliable installation of titanium hardware:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRiser Mounting Bolts (to the top triple clamp): Tighten to \u003cstrong\u003e8-12 Nm (6-9 ft-lbs)\u003c\/strong\u003e using blue Loctite.\u003c\/li\u003e\n\u003cli\u003eHandlebar Clamp Bolts (face clamps): Tighten to \u003cstrong\u003e20 Nm (15 ft-lbs).\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMake your e-bike feel more comfortable and precise with this stem riser\u003c\/li\u003e\n\u003cli\u003eDirect mount stem adds 2” of rise to your handlebars\u003c\/li\u003e\n\u003cli\u003eWide clamping area for increased bar stiffness\u003c\/li\u003e\n\u003cli\u003eBuilt strong to withstand abuse and light enough for racing\u003c\/li\u003e\n\u003cli\u003eMade from \u003cspan\u003eTitanium Ti-6Al-4V with a jet wash finish\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBolts directly to stock and most aftermarket forks\u003c\/li\u003e\n\u003cli\u003eFits 31.8mm handlebars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSur Ron LBX\u003c\/li\u003e\n\u003cli\u003eSegway X260\u003c\/li\u003e\n\u003cli\u003eTalaria Sting\u003c\/li\u003e\n\u003cli\u003eE-Ride Pro (Only fits with aftermarket or modified display mounts)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Part Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFOX 40:\u003c\/strong\u003e 2009+ models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarzocchi:\u003c\/strong\u003e 2013+ 888 and 380 models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRockShox BoXXer:\u003c\/strong\u003e All models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManitou Dorado:\u003c\/strong\u003e All models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther:\u003c\/strong\u003e Most dual crown downhill\/MTB forks (RST Killah, DNM, Fast Ace, etc.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Many of these e-bikes have been offered with a wide range of equipment, both from the factory and from third-party sellers. \u003cstrong\u003ePlease verify fitment with the specific setup of your bike prior to ordering.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eIf you have successfully installed this part on a setup not listed here, please \u003ca href=\"https:\/\/gritshift.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e so we can help others by updating this list.\u003c\/em\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":47036651864305,"sku":"SQ6982248","price":199.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/Untitled-5_95902873-be7b-4450-adb2-fe633b3d6298.jpg?v=1761015533"},{"product_id":"heavy-hitter-mx-direct-mount-riser-fat-bar-1-1-8-clamp-1","title":"Heavy Hitter MX Direct Mount Riser Fat Bar 1 1\/8\" Clamp","description":"\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eYou will need to trim your steering tube to the correct length to use this stem! This is ideal for most applications but required for this stem. This Stem is solely designed to ONLY work with 1 1\/8th dirt bike handlebars!\u003c\/p\u003e\n\u003cp\u003eThe Ability to run 1 1\/8th Motocross bars on your E-bike is quite possibly the most underrated upgrade. Gone are the days of bending 31.8mm MTB bars during a ride and not having replacements! You can now go to any dealership to grab a set of 1 1\/8th moto bars and keep your weekend going! Not to mention the availability of far more bend options to find your perfect ergonomics! A comfortable rider is a faster rider and safer rider. \u003c\/p\u003e\n\u003cp\u003eWe changed the ergonomics compared to what you typically see on MTB-style risers and put the bars directly over the Stem! This is pretty standard in the motorcycle world and for good reason! Steering feel is greatly affected by placing your bars out further then the triple clamps. \u003c\/p\u003e\n\u003cp\u003eFunctional and attractive, the Heavy Hitter MX Riser not only puts your body in a more comfortable position but also gives you better leverage over the front end making the bike more flickable; especially in low-speed situations.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cb\u003eTorque Spec:\u003c\/b\u003e\u003c\/em\u003e The recommended torque setting for the top clamp is 132 in-lb (11 ft-lbs), tighten each of the 4 bolts evenly to provide an even torque spec across all bolts. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMake your e-bike feel more comfortable and precise with this stem riser\u003c\/li\u003e\n\u003cli\u003eDirect mount stem adds 1.75\" of rise to your handlebars, while also repositioning them for better ergonomics\u003c\/li\u003e\n\u003cli\u003eWide clamping area for increased bar stiffness\u003c\/li\u003e\n\u003cli\u003eBuilt strong to withstand abuse and light enough for racing\u003c\/li\u003e\n\u003cli\u003eMade from 7075-T6 Aerospace-grade aluminum with an anodized finish\u003c\/li\u003e\n\u003cli\u003eBolts directly to stock and most aftermarket forks\u003c\/li\u003e\n\u003cli\u003eFits 1 1\/8\" motocross Fat Bars.  28.575 mm Clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal Fork Fitment (1-1\/8th bars required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This direct mount stem fits all standard mountain bike dual crown forks. Most E-Motos come equipped with mountain bike style forks. Please validate before purchase.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0511\/3964\/1496\/files\/Heavy_Hitter_MX_Direct_Mount_Riser_Fat_Bar_1_18_Clamp_Assembly_Guide.pdf?v=1772216005\"\u003e\u003cem\u003eDownload Tech Sheet (Assembly \u0026amp; Torque Specs)\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Black","offer_id":47036652060913,"sku":"SQ8942513","price":79.99,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":47036652126449,"sku":"SQ8942513GL","price":79.99,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":47036652093681,"sku":"SQ8942513PU","price":79.99,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":47036652028145,"sku":"SQ8942514","price":79.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":47036652159217,"sku":"SQ8942513RE","price":79.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":47036652191985,"sku":"SQ8942513BL","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/HeavyHitterMXDirectMountStemE-MotoRed.jpg?v=1761015533"},{"product_id":"heavy-hitter-2-inch-riser-direct-mount-stem-31-8mm-bars","title":"Heavy Hitter 2\" Inch Riser Direct Mount Stem 31.8mm Bars","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eWant better ergonomics, or just don't want your bars to twist while riding? Then you need a Direct Mount Stem, we have tested all of the most popular brands products on the market and either had issues with them breaking due to riser blocks or poor design, or just didn't like the ergo, which makes your steering feel weird. So we designed our own...\u003c\/p\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003eThe Heavy Hitter Direct Mount Stem was designed by our internal engineer, who also rides pretty darn hard, and all of us gave feedback on reach length, rise height. We went through 17 versions before we landed on this design. We have tested this is various ways to make sure this is the safest Direct mount you can get, and also the best feeling stem on the market. Most companies put a big focus on making something look the best. That's not us, we are riders. We want something that will work well and help improve our comfort and riding skills. \u003c\/p\u003e\n\u003cp\u003eFunctional and attractive, the Heavy Hitter Direct Mount Stem Riser not only puts your body in a more comfortable position but also gives you better leverage over the front end, making the bike more flickable, especially in low-speed situations.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e You will need stem spacers, or cut your stem to maintain the correct headset bearing tension. If you are searching for a Moto-inspired direct mount that uses 1-1\/8th bars, \u003ca title=\"MX Direct Mount\" href=\"https:\/\/gritshift.com\/products\/gritshift-heavy-hitter-mx-direct-mount-riser\"\u003echeck out this option HERE\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMake your e-bike feel more comfortable and precise with this stem riser\u003c\/li\u003e\n\u003cli\u003eDirect mount stem adds 2” of rise to your handlebars\u003c\/li\u003e\n\u003cli\u003eWide clamping area for increased bar stiffness\u003c\/li\u003e\n\u003cli\u003eBuilt strong to withstand abuse and light enough for racing\u003c\/li\u003e\n\u003cli\u003eMade from 7075-T6 Aerospace-grade aluminum with an anodized finish\u003c\/li\u003e\n\u003cli\u003eBolts directly to stock and most aftermarket forks\u003c\/li\u003e\n\u003cli\u003eFits 31.8mm handlebars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"color: #ff632c;\"\u003e\u003cstrong\u003eGritShift exclusive!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll GritShift parts are engineered to be tough enough to withstand extreme conditions while remaining light enough for racing applications. Every product that carries our name is tested to destruction in our shop and on the trails by our team of experienced riders - all so you can buy with confidence.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/LTl0ZCIOpsk\" height=\"315\" width=\"560\" data-dashlane-frameid=\"5809\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This direct mount stem fits all standard mountain bike dual crown forks. Most E-Motos come equipped with mountain bike style forks. Please validate before purchase.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0511\/3964\/1496\/files\/Heavy_Hitter_2_Inch_Riser_Direct_Mount_Stem_31.8mm_Bars_Assembly_Guide.pdf?v=1772216005\"\u003eDownload Tech Sheet (Assembly \u0026amp; Torque Specs)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Black","offer_id":47036652224753,"sku":"SQ0278922","price":64.89,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":47036652388593,"sku":"SQ0278922BL","price":64.89,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":47036652355825,"sku":"SQ0278922RE","price":64.89,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":47036652323057,"sku":"SQ0278922GL","price":64.89,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":47036652257521,"sku":"SQ0278923","price":64.89,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":47036652290289,"sku":"SQ0278922PU","price":64.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/HeavyHitterDirectMountStemE-MotoPurple.jpg?v=1761015532"},{"product_id":"heavy-hitter-420-billet-aluminum-super-sprocket","title":"Heavy Hitter 420 Billet Aluminum Super Sprocket","description":"\u003cp\u003eWant to get that grunt out of the corner on your E-Moto, or put massive power down with all of your upgrades? This sprocket was created out of necessity. As we kept bending all other aftermarket aluminum sprockets, not from hitting things! From the sheer torque these bikes produce when landing jumps. Which forced us to move back to the OEM style steel sprockets, so we wouldn't keep throwing chains and messing up motors.\u003c\/p\u003e\n\u003cp\u003eThis sprocket was designed to be as light as possible without compromising the structural integrity of the part. We have done rotational load tests in CAD, and also real-world testing, landing full throttle, and also hitting objects. This is hands down the strongest aluminum sprocket you will find for your bike!\u003c\/p\u003e\n\u003cp\u003eThese sprockets are built from one piece 7075 T6 aluminum and machined with precision to fit your bike. This is the perfect upgrade for riders who have heavier off-road tires or are looking at 18\/21 inch wheel sets. The bike becomes a bit lazy with the heavier wheels and tires and picking one of our exclusive sprockets will give you that pick up back. \u003c\/p\u003e\n\u003cp\u003eThis will also reduce chances of overheating the stock motor and controller, as we know the weight will increase the load required to turn the wheel, and re-gearing your bike to handle the weight is important to ensure long-term performance. Need a replacement chain, find them \u003ca href=\"https:\/\/gritshift.com\/search?type=product\u0026amp;options%5Bprefix%5D=last\u0026amp;options%5Bunavailable_products%5D=last\u0026amp;q=Chain\" title=\"Replacement Chain\"\u003eHERE\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight 7075 T6 design\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh-quality black anodizing\u003c\/li\u003e\n\u003cli\u003eBeveled edges for smooth chain engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSur Ron LBX\u003c\/li\u003e\n\u003cli\u003eSegway X160 \/ X260\u003c\/li\u003e\n\u003cli\u003eTalaria Sting MX3 \/ MX4\u003c\/li\u003e\n\u003cli\u003eTalaria XXX\u003c\/li\u003e\n\u003cli\u003eE Ride Pro-S\u003c\/li\u003e\n\u003cli\u003eE Ride Pro-SS \/ 2.0\u003c\/li\u003e\n\u003cli\u003eVentus ONE+\u003c\/li\u003e\n\u003cli\u003e79Bike Falcon Pro \/ GT\u003c\/li\u003e\n\u003cli\u003eRerode R1\u003c\/li\u003e\n\u003cli\u003eRawr Mantis X \/ Pro\u003c\/li\u003e\n\u003cli\u003eZero XB\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GritShift","offers":[{"title":"52","offer_id":47568530702577,"sku":"SQ2568244","price":53.99,"currency_code":"USD","in_stock":true},{"title":"48","offer_id":47568530637041,"sku":"SQ2568240","price":46.99,"currency_code":"USD","in_stock":true},{"title":"50","offer_id":47568530669809,"sku":"SQ2568242","price":49.99,"currency_code":"USD","in_stock":true},{"title":"54","offer_id":47568530735345,"sku":"SQ2568246","price":56.99,"currency_code":"USD","in_stock":true},{"title":"60","offer_id":47568530833649,"sku":"SQ2568250","price":66.99,"currency_code":"USD","in_stock":true},{"title":"56","offer_id":47568530768113,"sku":"SQ2568256","price":62.99,"currency_code":"USD","in_stock":true},{"title":"58","offer_id":47568530800881,"sku":"SQ2568248","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/HeavyHitterBilletAluminumSprocketUpgradeE-Moto2_b1fd29ab-fdaa-4d5f-8064-3bcbbcf85305.jpg?v=1765392840"},{"product_id":"heavy-hitter-428-billet-aluminum-super-sprocket","title":"Heavy Hitter 428 Billet Aluminum Super Sprocket","description":"\u003cp\u003eWant to get that grunt out of the corner on your E-Moto, or put massive power down with all of your upgrades? This sprocket was created out of necessity. As we kept bending all other aftermarket aluminum sprockets, not from hitting things! From the sheer torque these bikes produce when landing jumps. Which forced us to move back to the OEM style steel sprockets, so we wouldn't keep throwing chains and messing up motors.\u003c\/p\u003e\n\u003cp\u003eThis sprocket was designed to be as light as possible without compromising the structural integrity of the part. We have done rotational load tests in CAD, and also real-world testing, landing full throttle, and also hitting objects. This is hands down the strongest aluminum sprocket you will find for your bike!\u003c\/p\u003e\n\u003cp\u003eThese sprockets are built from one piece 7075 T6 aluminum and machined with precision to fit your bike. This is the perfect upgrade for riders who have heavier off-road tires or are looking at 18\/21 inch wheel sets. The bike becomes a bit lazy with the heavier wheels and tires and picking one of our exclusive sprockets will give you that pick up back. \u003c\/p\u003e\n\u003cp\u003eThis will also reduce chances of overheating the stock motor and controller, as we know the weight will increase the load required to turn the wheel, and re-gearing your bike to handle the weight is important to ensure long-term performance. Need a replacement chain, find them \u003ca title=\"Replacement Chain\" href=\"https:\/\/gritshift.com\/search?type=product\u0026amp;options%5Bprefix%5D=last\u0026amp;options%5Bunavailable_products%5D=last\u0026amp;q=Chain\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight 7075 T6 design\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh-quality black anodizing\u003c\/li\u003e\n\u003cli\u003eBeveled edges for smooth chain engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eE Ride Pro-SR\u003c\/li\u003e\n\u003cli\u003eE Ride Pro-SS 3.0\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GritShift","offers":[{"title":"60","offer_id":47568531063025,"sku":"SQ2568251","price":69.99,"currency_code":"USD","in_stock":true},{"title":"54","offer_id":47568530964721,"sku":"SQ2568247","price":59.99,"currency_code":"USD","in_stock":true},{"title":"50","offer_id":47568530899185,"sku":"SQ2568243","price":49.99,"currency_code":"USD","in_stock":true},{"title":"52","offer_id":47568530931953,"sku":"SQ2568245","price":54.99,"currency_code":"USD","in_stock":true},{"title":"56","offer_id":47568530997489,"sku":"SQ2568230","price":65.99,"currency_code":"USD","in_stock":true},{"title":"58","offer_id":47568531030257,"sku":"SQ2568249","price":67.99,"currency_code":"USD","in_stock":true},{"title":"48","offer_id":47568530866417,"sku":"SQ2568241","price":48.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/files\/HeavyHitterBilletAluminumSprocketUpgradeE-Moto2.jpg?v=1765392831"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/1348\/7857\/collections\/Heavy_Hitter.webp?v=1776648784","url":"https:\/\/howlingmoto.com\/collections\/heavy-hitter-parts-surron-talaria-electric-dirt-bike.oembed","provider":"Howling Moto","version":"1.0","type":"link"}