Can-Am Ryker Forward Reverse Gear Shift Extension Mod – Fits All Models 2019–2025

Can-Am Ryker Forward/Reverse Shift Extension (2019–2025, All Models)

Upgrade your Can-Am Ryker with the BLR Tuning Forward/Reverse Shift Extension — engineered for smoother, faster, and more comfortable gear changes on all Ryker models from 2019 to 2025.

• ✅ Universal fit – Compatible with all Ryker models (600, 900 ACE, Rally, and Sport) 2019–2025
• ✅ 5-minute install – All you need is a T30 Torx wrench
• ✅ High-grade aluminum construction – Lightweight, strong, and built to last
• ✅ Flexible head design – Flexes downward on impact instead of breaking
• ✅ Better leverage & easier reach – Shift with your toe or grab it by hand
• ✅ 100% Made in the USA

Why Upgrade Your Ryker Shifter?

The stock Can-Am Ryker shifter can feel short and awkward when switching between forward and reverse. Our shift extension adds extra leverage and a more comfortable reach — you'll notice the difference on your very first ride.

Note: Due to BRP size tolerance variations, you may need to slightly open the C-clamp mounting hole with a flat head screwdriver. This is a direct fit for the vast majority of Can-Am Rykers.

Installation Steps

1. Remove the factory T30 Torx screw
2. Slide off the stock rubber boot
3. Check fitment — if needed, open the C-clamp slightly with a flat head screwdriver
4. Position the shift extension where it feels right
5. Tighten with the included Allen bolt — do not overtighten
6. Reinstall the rubber boot & T30 screw

That's it — you're ready to ride.

This was one of the very first mods installed on our own Ryker here at BLR Tuning, and it remains one of the most practical upgrades you can make.

📺 Watch the full install video on our YouTube channel: Click Here to Watch

🚚 Free shipping anywhere in the USA — no extra charge at checkout.