MB-MX 2019+ CRF110/CRF125F Full Triple Clamp Set

Full billet triple clamp set for the 2019+ CRF110F and CRF125F.

Gen 2 Top clamp and bar mount set

Tiled MB-MX logo engraved into bar mount, top clamp and bottom clamp

Integrated steering stops to fit both bike models.

Integrated brake line guide

Mounting provisions for the OEM Key Mount in the stock location behind the number plate.

7075 Alloy steering stem included and pressed in.

Raw aluminum clamp sets will come with “grey” colored Zinc-Flake ultra-corrosion resistant screws

Anodized clamp sets will come with Black Oxide stainless screws

NO BEARINGS INCLUDED – I have the required bearings available here:  All Balls 22-1021- Tapered Steering Bearings CRF110/CRF125 2019+ | MB-MX

If bearings are ordered with the triple clamp set, I will install the bearing/seal onto the lower clamp for free.

CRF110F Fitment Notes – All Balls 22-1021 Bearing kit required for install, you will have to remove the OEM bearing races and install the new tapered races. The removal of the races is rather difficult unfortunately.

The plastic shroud on the OEM CRF110F compression/spanner nut will have to be removed for fitment of the top tapered bearing, otherwise you can order a 2019+ CRF125F compression nut (Honda OEM PN # 53220-K28-910) that has the correct plastic shroud for the tapered bearing.

CRF125F Fitment Notes – The 2019+ CRF125F comes from the factory with tapered bearings and races, so no race removal is required.

Number Plate cable guide included