No-Mar Tire Mounting Paste - Water-Soluble Tire Lube

Mount tires without fighting them, or your rims

No-Mar Tire Mounting Paste is a super slick, vegetable-based lubricant that makes a stubborn bead slide into place instead of fighting you. It is thick like petroleum jelly but petroleum-free, so it stays exactly where you spread it rather than running off the bead.

Use it straight from the jar as a paste for installation, or dilute it with water and spray it on for removal. A rust and corrosion inhibitor is built in, so your rims stay clean, and it is non-toxic and water soluble for easy cleanup.

Why riders and shops use it

• Super slick, non-runny paste that stays put on the bead
• Water soluble, cleans up with plain water
• Spray diluted for tire removal, use as paste for installation
• Rust and corrosion inhibitor protects your rims
• Doubles as an o-ring lubricant and inner tube or valve stem moisturizer
• Non-toxic and vegetable-based, no petroleum additives
• Eventually absorbs into the tire
• The 1-pint jar screws into the No-Mar Tire Changer tool collar

Keeps hot tire pressures honest

Because you can apply it as a paste with no water, you avoid the water expansion that conventional soap-and-water lubricants cause. That is the leading reason hot tire pressures climb, and it is also why nitrogen fills are wasted effort when water-based lube is used.

Storage and shelf life

Sealed at room temperature, the paste typically lasts at least 12 months. Heat, cold, or leaving it uncovered shortens that. If it begins to liquify at the end of its life it can still be used in a spray bottle for demounting. White flecks are just air bubbles from filling. If it freezes it may separate, and a couple of hours in warm sun or 10 to 15 seconds in the microwave with the lid off lets you stir it back to its usual brown-beige consistency.

Tire paste lube is a consumable supply and is not covered under warranty. Not for internal use.