FactoryZ QS8 Power Harness for Sur-Ron Light Bee

FactoryZ QS8 Power Harness for Sur-Ron Light Bee

Connect a QS8-equipped aftermarket battery to an upgraded controller with this FactoryZ power harness for the Sur-Ron Light Bee. Built with heavy-duty 7 AWG wire, the harness bypasses the stock Sur-Ron breaker and arrives pre-soldered for a cleaner installation.

Important compatibility note: This harness is intended for upgraded aftermarket controllers. It is not designed for the stock controller.

Key Features

• Supports aftermarket batteries with a QS8 connector
• Heavy-duty 7 AWG wire
• Bypasses the stock Sur-Ron breaker
• Pre-soldered QS8 male connector
• Two-pin male connector for the 12V voltage-converter connection
• Two ring terminals with M6 holes for connection to a compatible aftermarket controller
• Ships from the USA

Controller Compatibility

Designed for upgraded aftermarket controllers, including configurations such as the EBMX X-9000. Not intended for use with a stock controller.

Electrical Safety

Before connecting anything to live power, use a voltmeter to confirm polarity and verify that the battery, harness, and controller wiring match. Incorrect wiring can damage electrical components and create a safety hazard.

QS8 Connection Procedure

1. Insert the QS8 connector halfway into the battery connection.
2. Wait five seconds.
3. Push the connector fully together.

The QS8 connector includes anti-spark protection. Following this staged connection procedure helps reduce arcing and sparking that could damage the controller.

Specifications

• Fitment: Sur-Ron Light Bee with a compatible upgraded controller
• Wire gauge: 7 AWG
• Battery connector: QS8 male
• Controller terminals: M6 ring terminals
• SKU: QS8-PH
• Weight: 0.5 lb